Fontaine Genshin Impact Wooden Pin Collection
Cute-sized characters printed onto sustainably sourced wood and made into pins!
★ Printed on cherry wood with a matte coating
★ Gloss coating on the hair patterns on every pin, but certain pins have special effects.
★ All pins vary in height according to the character, but generally they are around 1.8 inches (Diona) to 2.2 inches (Zhongli) etc. Some are slightly taller if they have tall ears or are wearing a hat for example.
★ All pins have two pins on the back for stability. Only Paimon, Guoba, Klee’s Jumpty Dumpty, Lyney’s Grin-malkin Cat and Nezuko have one. All have a metal butterfly back.
★ Grading: S/A = minute or no scratches or chips in paint. Wood grain is minimal. B = very small chip/s in paint but not very noticeable. Has some visible wood grain on the paintwork. C = various chips that are noticeable or severe deformations due to grain or dents in wood grain (Not sold).
★ Each pin comes with a backing card, packaged sustainably in a glassine sleeve (despite the name, it is made from wood pulp and it is a paper!).
★ Care instructions: These pins should be fine in rain, but do not submerge in water. Clean with a damp cloth if it gets dirty ^o^ While it will stay pinned on a backpack pretty well for example, I personally wouldn’t recommend it if they will come into contact with a lot of surfaces, as it will scratch and possibly chip the paintwork. They are best displayed inside an itabag or on a pinboard! (^-^)b
Cute-sized characters printed onto sustainably sourced wood and made into pins!
★ Printed on cherry wood with a matte coating
★ Gloss coating on the hair patterns on every pin, but certain pins have special effects.
★ All pins vary in height according to the character, but generally they are around 1.8 inches (Diona) to 2.2 inches (Zhongli) etc. Some are slightly taller if they have tall ears or are wearing a hat for example.
★ All pins have two pins on the back for stability. Only Paimon, Guoba, Klee’s Jumpty Dumpty, Lyney’s Grin-malkin Cat and Nezuko have one. All have a metal butterfly back.
★ Grading: S/A = minute or no scratches or chips in paint. Wood grain is minimal. B = very small chip/s in paint but not very noticeable. Has some visible wood grain on the paintwork. C = various chips that are noticeable or severe deformations due to grain or dents in wood grain (Not sold).
★ Each pin comes with a backing card, packaged sustainably in a glassine sleeve (despite the name, it is made from wood pulp and it is a paper!).
★ Care instructions: These pins should be fine in rain, but do not submerge in water. Clean with a damp cloth if it gets dirty ^o^ While it will stay pinned on a backpack pretty well for example, I personally wouldn’t recommend it if they will come into contact with a lot of surfaces, as it will scratch and possibly chip the paintwork. They are best displayed inside an itabag or on a pinboard! (^-^)b
Cute-sized characters printed onto sustainably sourced wood and made into pins!
★ Printed on cherry wood with a matte coating
★ Gloss coating on the hair patterns on every pin, but certain pins have special effects.
★ All pins vary in height according to the character, but generally they are around 1.8 inches (Diona) to 2.2 inches (Zhongli) etc. Some are slightly taller if they have tall ears or are wearing a hat for example.
★ All pins have two pins on the back for stability. Only Paimon, Guoba, Klee’s Jumpty Dumpty, Lyney’s Grin-malkin Cat and Nezuko have one. All have a metal butterfly back.
★ Grading: S/A = minute or no scratches or chips in paint. Wood grain is minimal. B = very small chip/s in paint but not very noticeable. Has some visible wood grain on the paintwork. C = various chips that are noticeable or severe deformations due to grain or dents in wood grain (Not sold).
★ Each pin comes with a backing card, packaged sustainably in a glassine sleeve (despite the name, it is made from wood pulp and it is a paper!).
★ Care instructions: These pins should be fine in rain, but do not submerge in water. Clean with a damp cloth if it gets dirty ^o^ While it will stay pinned on a backpack pretty well for example, I personally wouldn’t recommend it if they will come into contact with a lot of surfaces, as it will scratch and possibly chip the paintwork. They are best displayed inside an itabag or on a pinboard! (^-^)b
